Need More Information?
1.800.826.5537
Contacts
Fax us: 1.941.755.6529
Hablamos Español
Heating and Cooling Low Pressure Chiller System
Two Models: Regular and Multi-Function
This instant hot water circulating machine brings low pressure centrifugal chiller to atmosphere or is used for pressurizing for lead checking by warming refrigerant to the desired temperature and pressure. This product has been tested for residential tankless hot water application, commercial heating of water, oil and other liquids. The elements are manufactured by Chromalox.
Our basic model VB-24-A weighs less than 60 lbs. and produces 24 KW of heating at 240 or 480 volts and can easily be converted to accommodate 208-277 Volt power supplies. A temporary power supply can be connected to the chiller starter. (Tankless does not supply the wiring and fusing) The unit has a separate 120 Volt control voltage supply that aslo powers the circulator pump. There is a switch that can reduce heating from 100% capacity to 50% to provide fingertip control of the rate of heat transfer to the refrigerant. On chillers over 1000 tons, higher capacities can be obtained by connecting two units in series, or use one connected to the evaporator and one the condenser. In addition, an optional pressure switch can be supplied. The unit comes with a 15' hot water hose and longer hoses are available at additional cost.
VB-24-A-Vacu_Breaker
VB-32-A-Vacu_Breaker
Order_Parts
TANKLESS INC. 2040-A Whitfield Park Avenue,
Sarasota, Florida, USA 34243
Phone: 1-800-TANKLESS 1-800-826-5537 Fax: 941-755-6529t
A Service professional’s DREAM.
Saves Time: You can save 3 or 4 hours
when pressurizing for leaks!
Greenwise: No more purging Nitrogen
and CFC’s into the air!
Compact: Lightweight and portable!
Easy to Use: Move 4 wires to convert
from high voltage to low voltage.
Affordable!
Digital Temperature Control with wide
setpoint temperature range Commercial
( 1 degree F to 140 degrees F) and
differential adjustment (1 degreee F to 30
degrees F)
LCD read out of sensor temperature
control settings, relay status and on
board diagnostics.
Selectable Fahrenheit/Celsius scales.
Brass and Copper Components.
Self-Flushing (No mineral build-up).
Compact unit weighs less than 60 pounds.
120 Volt control wiring - Plugs into any
extension cord.
Return water temperature control
(optional pressure switch)
Delete this switch to control heaters for 100% or
50% capacity
Instant Hot Water. Warranted.