Tankless Inc. has a three phase electric product that will do the job for any customer with its three distinct product lines. One line is the lower technology C line. It is simple to diagnose and repair, has only three working parts, is extremely reliable, and stores 1/3 to 1 ¾ gallons of hot water in its mini boiler so it provides instant hot water.   It, however, will have a temperature variance of +-3 degrees from its fixed setting.

The second line, CE series of heaters, has all the new technology, computer board, flow meter, and “in the water” temperature measuring devices. The temperature fluctuation with this unit is +-1 degree Fahrenheit and the temperature can be adjusted from 60 to 185 degrees. This line , however, costs slightly more, has six working parts, and takes a little more time to diagnose and repair a problem.

The third line is the CERO line which is the CE series with all stainless steel parts that touch the water. It is more expensive but is fine for heating RO water and other more caustic types of fluid.

We invite you to compare our products, price, quality and service with Keltech, Eemax or any other tankless water heater manufacturer:   We expect you to find our product and service second to none.

How Our Electric Tankless Hot Water Heater Model CE-72-KW Compares To EEMAX WATER HEATERS:

Electric Tankless Hot Water Heater Model CE-72-KW - Tankless Water Heaters heat water directly without the use of a storage tank. Therefore, they avoid the standby heat losses associated with storage water heaters. This twelve element electronic board controlled unit produces water within a tight temperature range. Output temperature is adjustable from one degree more than the inbound fluid temperature to 185 degrees Fahrenheit.

This is our largest electronic unit and it delivers a constant supply of hot water. At 72KW it heats over ten gallons per minute by 50 degrees F. With its optional 1” in and out pipe the heater will work in high volume operations such as eyewash stations where you need a limited amount of temperature increase and volume.   It meets all ANSI Z 358.1 tepid water requirements. Product Page.

Eemax Model Ex72T12DS277V
* High powered on-demand water heater, 18kW to 32kW
* Suited for higher flow rate industrial/commercial applications
* Installation in series with other Eemax units will give a higher flow rate or greater temperature rise (2 units max) Standard temperature range: 100°F to 140°F
* Designed for wall mount * Thermostat is accurate within +/- 1.0° F

The Tankless Inc. units are more rugged and reliable than the Eemax line for about the same money and probably a little less.

How Our Electric Tankless Hot Water Heater Model CE-72-KW Compares To Keltech Model CN 72 KW WATER HEATERS:

Custom Built Fluid Process Heaters - Keltech custom engineers tankless process heaters for large industrial fluid applications. Keltech heater cores meet a wide variety of needs from producing process water temperatures
to re-circulation loops, and from providing hot water for heat exchanger use.

Overheat protection – Electronic (limit controller) – Mechanical (bimetal) • Incoloy heating elements - NEMA 4X and NEMA 12 enclosures - Brass/copper heat exchanger • External emergency stop button • Solid-state relays • internal finger-safe fusing • PID control with digital display of set-point and actual temperature

The Tankless Inc. units are as rugged and reliable as the Keltech line but for much less money. So compare and save with Tankless.