Electric Tankless Pool Hot Water Heater - TANKLESS Model SP-32-6 Element 240 Volt Pool Heater. This large pool heater uses copper heat exchangers with brass heads and is available in all U.S. zones. It also takes up to 60% less space that the competition’s units and is recommended on pools up to 35,000 gallons. It will heat a 30,000 gallon pool .43 degrees per hour or 4.3 degrees Fahrenheit in 10 hours.

With the stainless steel exchanger option at an added cost of $800 this unit will resist the highly corrosive situations in salt water pools and high chlorine content pools. Minimum 250 AMP house electrical service recommended. Factory Direct Price $2,295 plus shipping and handling.

Specifications:
Dimensions: 20.5”W x 19”H x 7.5”D (With Fittings)
For overall width, add 1.5”
Weight: 62 Lbs. Shipped
Material: Copper Exchanger
Box: White Aluminum Casing
Pipe Size: 1” Brass Female IPS
Voltage: 208/240 Single Phase
Max AMPs: 133 (3 x 50 AMP Double Throw 220 volt breakers)
BTU Output: 109,184
Wiring: 3-pair #6 copper wires with ground or larger (Refer to the National Electric Code)
Total of 7 Wires
Efficiency: 98.9%
Operating Range: 0-150 PSI
Protection: Dual Thermals and Fuses

Unbalanced PH and high Chlorine content can be damaging to our heaters, causing erosion. This kind of damage is not covered by our warranty. Stainless steel heat exchangers are now available for salt water pools and high chlorine content pools and spas for an extra $800.  They will extend the life of your pool heater. We strongly recommend this option. Ask your sales representative for the details on this option when you place your order.

Electric Tankless Pool Hot Water Heater Model SP-32-6 Pool Heater - Factory Direct Price $2,295 plus shipping and handling.

Model Selection Chart

Product Sheet For SP 32

Home | About | Contact Us | Residential Heaters | Commercial Heaters | Pool And Spa Heaters | Radiant Heaters | Order | FAQ'S |Privacy Policy