Eyewashing and Showers Application - Back to List Of Industry Applications

This product is used for heating the water required for an eyewash station and a drench shower. The units provide 370,000 BTUs per hour and a maximum flow rate thru the system of over 30 gallons per minute.

This customer application required two of these 108 KW set ups for two different indoor locations in a large facility.

 
 eyewashing and shower Application

This drawing shows a Tankless Inc. C-108 KW unit with the following options added.

High volume mixing valve to accommodate the high flows require. 1" in/out pipe required to increase the flow thru the unit and a pressure switch.

The 108 KW unit meets the 23 gallon per minute heating requirements of tepid water (60-100 degrees) for an eyewash and drench showers. It will heat 23 gallons per minute of 60 degree inbound water to 92 degrees F which is in the middle of the required range. Twenty three gallons per minute is what is required for one eyewash station and one drench shower. The system will flow over 30 gallons per minute so you could operate as many as one drench shower and three eyewash stations with one unit. Be sure and check the ANSI specifications and the ground water temperature in your location to determine your exact needs.

Click here for product specifications and pricing.

Tankless, Inc. 2060 Whitfield Park Ave., Sarasota, FL 34243 Phone: 1-800-TANKLESS 1-800-826-5537
Home | About | Contact Us | Residential Heaters | Commercial Heaters | Pool And Spa Heaters | Radiant Heaters | Order | FAQ'S
Privacy Policy | Links

 

 

tankless hot water and solar heaters

©Copyright 2016 Tankless Inc. All Rights Reserved.