Electric Tankless MODEL CF-90-KW
  • No ramp up time as the first drop of water from the unit is at temperature

  • Minimal working parts provides a long mean time to failure

  • Air relief system and unique water flow make this unit more reliable than other tankless units

  • Individually fused elements

  • Nine individual circuits in this unit keep the customer from being out of service if one circuit fails

  • The optional flow switch for $200 assures water flow thru the unit before the unit will heat thus providing extra protection against supply shut offs

  • An optional electronic temperature control at $300 allows user to adjust the system temperature in recirculating systems

  • Optional operating lights at a cost of $150 show which elements are on at any time.
  • Produces 307K BTUs per hour

  • All common three phase voltages available

  • Fixed output temperatures with numerous selections available

  • Stainless steel heat exchangers

  • 1 In/Out piping and valves included

  • Heats 10.2 gallons per minute or 550 gallons per hour by 60 degrees

  • Heats 25 gallons per minute or 1500 gallons per hour by 24 degrees Fahrenheit

  • Recommended in safety shower applications if your incoming water is over 50 degrees F

  • ANSI Z 358.1 compliant with the use of a mixing valve

  • Recirculation systems add to the usable volume

  • Certified to CSA STD E60335-2-35

  • Conforms to UL 499
Click on smaller images to see a different view.
Mouse over larger pic for expanded view

Suggested Retail Price $6075

Contractors or Distributors

Click here to request a Quote for the CF-90-KW

 Used in large commercial applications

You can view customer application drawings on our applications pages for all our units(see menu)
and see specific applications for this unit below.

Chemical General Cleanup
Energy Boiler Replacement
Government Office Building
Housing Barracks
Phase of Electricity Required   Three
Individually Fused elements   Yes

Full Load Amp Draw at 575 N/A
Full Load Amp Draw at 480   108
Full Load Amp Draw at 380 N/A
Full Load Amp Draw at 240   215
Full Load Amp Draw at 208   250
Y or Delta Configuration for 480 Volt Units   Delta
In/Out Pipe Size   1 "
Heat Exchanger Material   316 SS
Enclosure Size W x H x D   25.5 x 24 x 9.25
Area Needed To Install and Repair   43.5 x 52.25 x 40
Enclosure Size Including Fittings   25.5 x 36 x 9.25
Enclosure Rating   Nema 3 - Nema 4 Available
Mounted at Customer Site Via Brackets at top and bottom of box
Efficiency Rating 98.90%
Operating Pressure Range 0-150 PSI
BTU Output Per Hour 307,080
Temperature Output Maximum 200
Output Temperature Settings Available 90,110,125,145,155,185,200
Output Temperature Adjustable No, With the optional ETC you can adjust the
temperature in recirculation systems
Temperature Output Minimum 90
Freeze Protection Optional
Minimum Flow To Engage 2 G.P.M. with optional flowswitch, 0 without
the switch
Number of Over Temp Protections Two
Maximum Flow in G.P.M. at 60 PSI 42
Shipping Weight 125 Lbs.
Shipping Box Size skid only
Warranty 2 years electrical parts
5 years on heat exchanger

NEMA 4 Enclosures to allow outside installation
Mixing Valves to allow two temperature outputs from the same unit
Temperature Controls
Pumps for recirculating systems

Tankless, Inc. 2060 Whitfield Park Ave., Sarasota, FL 34243 Phone: 1-800-TANKLESS 1-800-826-5537
Home | About | Contact Us | Residential Heaters | Commercial Heaters | Pool And Spa Heaters | Radiant Heaters | FAQ'S
Privacy Policy | Links



tankless hot water and solar heaters

Copyright © 2017 Tankless Inc. All Rights Reserved.