Electric Tankless MODEL CF-48-KW
  • No ramp up time as the first drop of water from the unit is at temperature

  • Minimal working parts provides a long mean time to failure

  • Air relief system and unique water flow make this unit more reliable than other tankless units

  • Individually fused elements

  • Six individual circuits in this unit keep the customer from being out of service if one circuit fails

  • The optional flow switch for $200 assures water flow thru the unit before the unit will heat thus providing extra protection against supply shut offs

  • Optional operating lights at a cost of $150 show which elements are on at any time.
     
  • Produces 164K BTUs per hour

  • All common three phase voltages available

  • Fixed output temperatures with numerous selections available

  • Stainless steel heat exchangers

  • or 1 In/Out piping and valves included

  • Certified to CSA STD E60335-2-35

  • Conforms to UL 499

  • Flows 30 GPM+ thru optional 1 fittings

  • ANSI Z 358.1 compliant using 90 degree thermostats and a mixing valve

  • Heats 5.5 gallons per minute or 330 gallons per hour by 60 degrees
    Fahrenheit

  • Heats 25 gallons per minute or 1500 gallons per hour by 13 degrees Fahrenheit
Click on smaller images to see a different view.
Mouse over larger pic for expanded view


Suggested Retail Price $4150
plus $125 Shipping and Handling.

End Users
Order CF-48-KW Now

Contractors or Distributors

Click here to request a Quote for the CF-48-KW
 
 

Used in food processing, restaurants, multiple sink applications, sanitization, safety showers, eye wash stations and showers.

You can view customer application drawings on our applications pages for all our units(see menu)
and see specific applications for this unit below.

IndustryApplication
Retail Nail Salon
Housing Campground
     
Phase of Electricity Required   Three
Individually Fused elements   Yes

 
Full Load Amp Draw at 575   N/A
Full Load Amp Draw at 480   57
Full Load Amp Draw at 380 72
Full Load Amp Draw at 240   113
Full Load Amp Draw at 208   133
Y or Delta Configuration for 480 Volt Units   Delta
In/Out Pipe Size   3/4 "
Heat Exchanger Material   304 SS
Enclosure Size W x H x D   14.75 x 30 x 9
Area Needed To Install and Repair   30 x 53 x 40
Enclosure Size Including Fittings   21.25 x 42 x 9
Enclosure Rating   Nema 3 - Nema 4 Available
Mounted at Customer Site Via Brackets at top and bottom of box
Efficiency Rating 98.90%
Operating Pressure Range 0-150 PSI
BTU Output Per Hour 163,776
Temperature Output Maximum 200
Output Temperature Settings Available 90,110,125,145,155,185,200
Output Temperature Adjustable No, With the optional ETC you can adjust the
temperature in recirculation systems
Temperature Output Minimum 90
Freeze Protection Optional
Minimum Flow To Engage 2 G.P.M. with optional flowswitch, 0 without
the switch
Number of Over Temp Protections Two
Maximum Flow in G.P.M. at 60 PSI 32
Shipping Weight 78 Lbs.
Shipping Box Size 44 x 15 1/8 x 20
Shipping Mode UPS
Warranty 2 years electrical parts
5 years on heat exchanger

NEMA 4 Enclosures to allow outside installation
Mixing Valves to allow two temperature outputs from the same unit
Temperature Controls
Switches
Pumps for recirculating systems

Tankless, Inc. 2060 Whitfield Park Ave., Sarasota, FL 34243 Phone: 1-800-TANKLESS 1-800-826-5537
Home | About | Contact Us | Residential Heaters | Commercial Heaters | Pool And Spa Heaters | Radiant Heaters | Order | FAQ'S
Privacy Policy | Links

 

 

tankless hot water and solar heaters

©Copyright 2016 Tankless Inc. All Rights Reserved.