COMMERCIAL MODEL CE-144-KW FEATURES
Click on smaller images to see a different view.
Mouse over larger pic for expanded view


Suggested Retail Price $9990
plus $350 Shipping and Handling.

End Users
Order CE-144-KW Now

Contractors or Distributors
Click here to request a Quote for the CE-144-KW
  • Special air relief system affords increased reliability

  • Dynamic load balancing insures even element wear to improve longevity

  • Optional low watt density elements that increase the productís life and reliability are available on this size unit - Click here for more details

  • Electronic controls with minimal working parts

  • Standard NEMA 3 enclosure provided with NEMA 4 available

  • Output temperature adjustable in one degree increments from
    60 to 185 F

  • LED shows output temperature setting and flashes actual temperature if
    the customer is asking for more heat than is available

  • Stainless steel heat exchangers
     
  • Individually fused elements

  • 1 1/4 " in/out stainless pipe and valves included
     
  • Flows 55 GPM

  • Certified to CSA STD E60335-2-35

  • Conforms to UL 499

  • Heats 10.8 gallons per minute or 656 gallons per hour by 90 degrees Fahrenheit

  • Accurate to +/- 1 degree F

  • Two 72 KW units in one enclosure

  • Produces 491 KW BTUs per hour

  • Three standard over temperature protections

Recommended for large commercial applications where adjustable output temperatures are required

You can view customer application drawings on our applications pages for all our units(see menu)
and see specific applications for this unit below.

IndustryApplication
Chemical Eyewash
   
   
   
   
   
   
   
   
   

 

     
Phase of Electricity Required   Three
Individually Fused elements   Yes
Full Load AMP Draw at Available Three
Phase Voltages n/a means not available
   
Full load Amp draw at 575   144
Full load Amp draw at 480   172
Full load Amp draw at 240   344
Full load Amp Draw at 208   400
Y or Delta configuration for 480 volt units   Delta
In/out pipe size   1 1/4"
Heat Exchanger material   316 SS
Enclosure size W x H x D   36 x 36 x 12
Area Needed To Install and Repair   60 x 53 x 48
Enclosure Size Including Fittings   57 x 45 x 12
Enclosure Rating   Nema 4 & 4 x available
Mounted at Customer Site Via   Brackets at top and bottom
of box
Efficiency Rating   98.90%
Operating Pressure Range   0-150 PSI
BTU Output Per Hour   491,328
Temperature Output Maximum   185
Output Tempaerature Adjustable   Yes- 1 Degree Increments
Output Temperature Settings Available   60 - 185 F
Temperature Output Minimum   60
Freeze Protection   Yes (Standard)
Number of Over Temp Protections   Three
RS 232 Interface Available   Yes
Minimum Flow To Engage   0.25
Maximum Flow at 60 PSI   62
Shipping Weight   350 Lbs.
Shipping Box Size   skid only
Shipping Mode   Truck
Warranty   2 Years Electrical Parts
5 Years on Heat Exchanger

NEMA 4 Enclosures to allow outside installation
Mixing Valves to allow two temperature outputs from the same unit
Temperature Controls and safety switches
Pumps for recirculating systems
RS 232 Interface
External Kill Switch

 
 

Tankless, Inc. 2060 Whitfield Park Ave., Sarasota, FL 34243 Phone: 1-800-TANKLESS 1-800-826-5537
Home | About | Contact Us | Residential Heaters | Commercial Heaters | Pool And Spa Heaters | Radiant Heaters | Order | FAQ'S
Privacy Policy | Links


tankless hot water and solar heaters

©Copyright 2016 Tankless Inc. All Rights Reserved.